This article provides information about what power adapter you should use with your rabbit r1, how long it takes to charge your r1, and how to fix issues with charging your r1.
How to charge your rabbit r1
Find answers to common questions about charging your rabbit r1 in the sections below.
What power adapter should I use to charge my rabbit r1?
It is important to use the right power adapter, also known as a “wall wart” or “charging block”, to safely charge your rabbit r1.
Use a 5 volt, 1 amp USB power adapter and a USB-C charging cable to charge your r1. A 5 volt, 1 amp power adapter may also be labeled as “5W” or “5V 1A”.
Note: A USB-C charging cable and power adapter are not included with your rabbit r1.
How do I know if my rabbit r1 is charging?
When your r1 is turned off and actively charging, a rabbit running in a wheel will appear on the screen.
How long does it take to charge my rabbit r1?
Your r1 takes approximately 70 minutes to charge from 0 to 100% when using a 5V 1A charger.
How to fix charging issues with your rabbit r1
Try the following troubleshooting tips to fix problems charging your rabbit r1.
- Use the right power adapter. Your r1 is meant to be charged with a 5V 1A power supply.
- Charge in a safe spot. Avoid charging your r1 in places with extreme temperatures, like a hot car. The safe operating range is from 0°C to 40°C (32°F to 104°F)
- Firmly insert the charging cable. Make sure the USB-C connector is fully inserted into the charging port on your r1. You should feel and hear a click when the cable is properly seated.
- Try a different charging cable. Use a different USB-C cable to charge your r1 to help narrow down the issue.
- Look for damage on the charging port. If the charging port is damaged, learn about rabbit’s warranty policy.